How you can Adjust the Reclining Tension on the Lazy Boy Recliner

The strain adjustment on the Lazy Boy Recliner enables you to definitely set the strain around the reclining mechanism to best react to your own personal size and strength. Should you find it hard to break the rules or pull the lever right into a reclining position then you might want to lessen the tension. If you're a taller or heavier person then you might want to boost the reclining mechanism tension.

Most lazy boy reclining chairs are outfitted with a set of wing nuts or thumb wheels beneath the chair that allow you to adjust the reclining mechanism tension. First make certain the leg relaxation is closed, then tilt the chair forward therefore it rests around the tips of their arms and the top its back so that you can see beneath the chair.

Around the Reclina-Rocker chair, Reclina-Glider chair and Reclina-Way chair you need to see two wing nuts (one on both sides) towards the rear of the recliner underneath the chair. The Reclina-Glider Swivel Recliner has two thumb wheels rather than wing nuts but they may be modified very much the same.

Around the Lazy Boy Classics Low Profile and Leg recliner with 3-position mechanism you need to begin to see the two wing nuts (one on both sides) toward the middle of the recliner underneath the chair.

You should adjust each side equally and also to simply make small changes (about a quarter of the turn) before you feel at ease. To improve the reclining tension turn the wing nuts or thumb wheels clockwise a quarter switch on each side. To lower the strain turn the wing nuts or thumb wheels counter-clockwise a quarter switch on each side. Return the chair to the upright position and try out the new setting. Repeat the steps right here if more adjustment is needed.

Never tighten or release the adjustment wing nuts or thumb wheels completely or else you damages the strain spring. The spring shouldn't move ahead the bolt after making the changes. Whether it does, make certain you switch the wing nut or thumb wheel clockwise at least one half turn after tightening it therefore the spring no more moves. Nor if the spring be completely compressed after making your changes. If the happens, release the wing nuts or thumb wheels at least one half a turn counter-clockwise to prevent harmful the strain spring.

Always adjust both wing nuts or thumb wheels equally.